Advantech ADAM-4018-BE

Advantech ADAM-4018+-BE thermocouple input module 8-channel Modbus

Industrial Material > Automation > eAutomation

Advantech ADAM-4018+-BE thermocouple input module 8-channel Modbus

Lieske Part No. 891920
Mfg Part No ADAM-4018-BE
EAN-Code
Manufacturer Advantech
Here only 187,33 EUR
222,92 EUR incl. VAT

Further information for Advantech ADAM-4018+-BE thermocouple input module 8-channel Modbus

General
Number of channels8
Resolution16 Bit
Input rangesProgrammable
Input typesThermoelement, low voltage, 4–20 mA
Insulation3000 Vdc
Communications protocolModbus/RTU
Cable break detectionYes
The ADAM-4018+-BE from Advantech is an analog input module for industrial automation systems. It features eight channels and enables the acquisition of various analog signals, such as thermocouple signals, low-voltage or current signals in the range 4–20 mA. The module is designed for use in measurement and monitoring systems where high accuracy and reliability of data are required. The 16-bit resolution ensures precise signal reproduction, enabling even fine changes within the measurement range to be detected. The inputs are programmable, allowing the respective input type to be set via software according to the application.

Applications
This module is suitable for applications in industrial process automation, such as in manufacturing, energy supply, or building automation. It can be used to monitor temperature trends, pressure values, or other physical quantities captured via analog sensors. The cable break detection function ensures that a fault condition is recognized and reported when a sensor connection is interrupted, thereby increasing system reliability.

Functions and Equipment in Detail
Each of the eight channels can be individually configured to process either thermocouple signals (T/C), low-voltage, or current signals (4–20 mA). Configuration is performed via software, allowing the module to be flexibly adapted to different sensors and measurement tasks. Optical isolation with 3000 Vdc protects the module and connected devices from disturbances caused by electrical voltage spikes or potential differences, which is particularly important in industrial environments.

Technology Explained Simply
The 16-bit resolution means the module can distinguish 65,536 different values per channel, enabling high measurement accuracy. Optical isolation separates the module’s electrical circuits from external sensors, thereby preventing disturbances and overvoltages. Cable break detection identifies when a sensor cable is interrupted and signals this to avoid incorrect measurements.

Compatibility and Accessories
The module supports the Modbus/RTU protocol, enabling standard communication with other devices in an industrial network. It is therefore compatible with a wide range of control systems and SCADA platforms that support Modbus. Support for 4–20 mA allows connection to standard industrial sensors using this current range.

Mounting and Installation
The module is designed for mounting in standard 19-inch racks or on DIN rails. Installation is performed by mechanical fixation followed by wiring the sensors to the corresponding inputs. Communication is via a serial communication interface, which is connected to an appropriate bus or Modbus network.

Advantages in Operation
Thanks to programmable input ranges and high resolution, the module provides a flexible and precise measurement environment. Optical isolation increases system safety and stability, especially in electrically demanding environments. Cable break detection improves fault tolerance and reduces maintenance time, as fault sources can be identified more quickly. Support for Modbus/RTU enables easy integration into existing automation architectures.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/891920
qrcode für Advantech ADAM-4018+-BE thermocouple input module 8-channel Modbus