| General |
| Number of channels | 8 piece |
| Resolution | 16 Bit |
| Input range | Programmable mV, V, mA |
| Insulation | 3000 Vdc |
| Protocol | Modbus/RTU |
| Support | 4-20 mA |
The ADAM-4017+ from Advantech is an analog input module with eight channels, developed for industrial measurement and monitoring applications. It features a 16-bit resolution and enables digital acquisition of analog signals such as voltages (mV, V) and current signals (mA), with input ranges for each channel individually configurable via software. The module is designed for use in industrial environments where high signal accuracy and reliability are required. Optical isolation with 3000 Vdc protects internal circuits from interference and voltage spikes, enhancing operational safety. The module supports the Modbus/RTU protocol, making it integrable into existing automation and control systems. It is particularly suitable for applications requiring acquisition of 4-20 mA signals, commonly found in process industries.
Applications
The ADAM-4017+ is used in various industrial applications, particularly in process automation, machine monitoring, and building automation. It is suitable for acquiring sensor data such as temperature, pressure, humidity, or flow rates transmitted via analog signals. The modular design enables flexible integration into existing systems, with configurable input ranges allowing adaptation to different sensors and measurement ranges. Support for Modbus/RTU ensures compatibility with a wide range of control devices and SCADA systems.
Functions and Features in Detail
The module features eight independent analog inputs, each configurable via software for different signal types. Input ranges can be set for mV, V, and mA signals, with support for 4-20 mA signals enabling direct connection to industrial sensors. The 16-bit resolution ensures high measurement accuracy and fine resolution of acquired values. Optical isolation with 3000 Vdc protects electronic components from electrical interference and potential differences, which is especially important in electrically harsh environments. The module form factor is designed for use in industrial control enclosures.
Technology Explained Simply
The 16-bit resolution means the module can distinguish 65,536 different values per channel, enabling high accuracy in analog-to-digital conversion. Programmable input ranges allow flexible adaptation to different sensors without requiring hardware changes. Optical isolation provides galvanic separation between the input side and internal electronics, preventing disturbances caused by voltage spikes or differing ground potentials. The Modbus/RTU protocol is an industry standard for serial communication between control devices and modules. Support for 4-20 mA signals is standard in process industries, as these signals can be transmitted stably over long distances.
Compatibility and Accessories
The ADAM-4017+ is designed for use in systems supporting the Modbus/RTU protocol. It can be used in combination with other modules from the ADAM series or with control devices using Modbus/RTU. The module form factor allows mounting in standard control enclosures.
Mounting and Installation
The module is mounted in a standard control enclosure, with mounting possible via screws or a rail. The terminal connectors enable easy connection of sensors. Configuration is performed via software, with input range settings adjusted per channel. Communication occurs via a serial interface connected to a control device or gateway. Installation does not require special tools, but proper wiring and grounding are necessary to avoid interference.
Operational Advantages
The ADAM-4017+ offers a cost-effective solution for analog signal processing in industrial applications. High resolution and programmable input ranges enable flexible and accurate measurement. Optical isolation enhances operational safety, especially in electrically harsh environments. Support for Modbus/RTU ensures easy integration into existing systems. The module form factor enables compact and reliable installation in control enclosures.