| General |
| Degree of protection | IP54 |
| Meter position width | 450 mm |
| Meter position arrangement | 3-point |
| Accessory type | Dome |
| Door | None |
| Application range | outdoors |
The SY450A meter point cover from ABN is an accessory for meter fields in outdoor applications, specifically designed for 3-point meter points with a total width of 450 mm. As a hood without a door, it provides protective covering for electricity meters, preventing unauthorized access and protecting against weather influences. The cover is intended for use in outdoor installations where sufficient protection against dust and splashing water is required.
Meter point cover is the primary function of this product. It is mounted over meter fields to protect the underlying measuring devices from external influences. The cover is not equipped with a door, meaning access to the meters is only possible after removing the hood. This is typical for installations where constant accessibility is not required, but a high protection standard must be ensured.
Protection class IP54 is the central technical specification. This protection class means the device is protected against dust (dust-protected, but not dust-tight) and against splashing water from any direction. The IP54 classification makes the cover suitable for outdoor use, particularly in areas where rain or splashing water due to wind or movement may occur. The cover is thus suitable for outdoor installations such as residential buildings, industrial facilities, or public institutions, where meter fields are not installed under a roof or in enclosed rooms.
3-point meter points refer to the arrangement of meters in a meter field, where three measuring points (e.g., for three individual consumers or phases) are arranged side by side. The cover is designed for a total width of 450 mm, which corresponds to the standard width for such arrangements. The precise fit ensures secure and aesthetic coverage without gaps that could serve as entry points for moisture or foreign objects.
The cover is offered as
accessory for meter fields (ZAS/STAS), meaning it is not sold as a standalone meter field but as a supplement to existing installations. The cover protects the meters from mechanical damage and weather influences without impairing the function of the measuring devices.
Installation is typically done directly onto the meter field, where the cover is slid over the meter plate and secured. The cover is designed for outdoor use, enabling its application in outdoor areas such as courtyards, driveways, or on buildings outside indoor spaces.
Applications include particularly outdoor installations where meter fields are not installed under a roof or in enclosed rooms. The cover is suitable for residential buildings, commercial properties, industrial facilities, or public institutions, where a high protection class against weather influences is required. The IP54 protection class makes it suitable for regions with frequent rain or splashing water, but not for permanent submersion or diving conditions.
The cover is designed as
accessory for meter fields and is not offered as a standalone meter field. It does not include additional components such as a door, lock, mounting accessories, or documentation. The cover serves exclusively the protective function and is not designed for direct access to the meters during operation.
Operational advantages include easy installation, high protection class, and precise fit for standard 3-point meter points. The cover ensures long-term protection against dust and splashing water, increasing the lifespan of the meters underneath and reducing the need for maintenance. Outdoor use enables flexible installation without additional protective measures such as roof overhangs or protective housings.
The IP54 protection class is sufficient for protection against splashing water and dust, but not for submersion or permanent wet conditions.
The cover is designed as a
hood, meaning it is slid over the meter field and secured. The exact fastening method (e.g., screws, clips) is not described. The cover is not equipped with a door, so access to the meters is only possible after removing the hood. This is typical for installations where constant accessibility is not required.
The cover is designed for 3-point meter points, which is a standard arrangement in electricity meter installation. The total width of 450 mm corresponds to the usual width for such arrangements. The precise fit ensures secure and aesthetic coverage without gaps that could serve as entry points for moisture or foreign objects.
The cover is offered as accessory for meter fields (ZAS/STAS), meaning it is not sold as a standalone meter field but as a supplement to existing installations. The cover protects the meters from mechanical damage and weather influences without impairing the function of the measuring devices.
Installation is typically done directly onto the meter field, where the cover is slid over the meter plate and secured. The cover is designed for outdoor use, enabling its application in outdoor areas such as courtyards, driveways, or on buildings outside indoor spaces.
Compatibility and accessories refers to its use as accessory for meter fields (ZAS/STAS). The cover is specifically designed for 3-point meter points with a total width of 450 mm. The cover does not include additional components such as a door, lock, mounting accessories, or documentation.
The IP54 protection class is sufficient for protection against splashing water and dust, but not for submersion or permanent wet conditions.
The cover is designed as a
hood, meaning it is slid over the meter field and secured. The exact fastening method (e.g., screws, clips) is not described. The cover is not equipped with a door, so access to the meters is only possible after removing the hood. This is typical for installations where constant accessibility is not required.
The cover is designed for 3-point meter points, which is a standard arrangement in electricity meter installation. The total width of 450 mm corresponds to the usual width for such arrangements. The precise fit ensures secure and aesthetic coverage without gaps that could serve as entry points for moisture or foreign objects.
The cover is offered as accessory for meter fields (ZAS/STAS), meaning it is not sold as a standalone meter field but as a supplement to existing installations. The cover protects the meters from mechanical damage and weather influences without impairing the function of the measuring devices.
Installation is typically done directly onto the meter field, where the cover is slid over the meter plate and secured. The cover is designed for outdoor use, enabling its application in outdoor areas such as courtyards, driveways, or on buildings outside indoor spaces.