| General |
| Module type | Low - |
| Minimum depth | 210 mm |
| Cover | Closed - |
| NT profile | Yes - |
| ST profile | Yes - |
| Module size | PLE 48 - |
| Packaging unit | 1 - |
The ABN MT2270 is a deep, empty module for use in meter enclosures and distributors. It serves as a building unit in modular systems and is specifically designed for installations requiring increased space. The module has a width of 500 mm and a height of 300 mm and can be used from a housing depth of 210 mm. It is supplied with a closed cover, enabling clean and protected mounting. The construction is designed for use in modular kits available in shallow or deep configurations.
Applications
This module is intended for use in electrical distribution systems, particularly in meter enclosures, where modular and flexible division of building units is required. It is suitable for installations requiring greater depth to accommodate larger components or multiple devices. The dimensions of 500 mm width and 300 mm height provide sufficient space for standard or larger assemblies. The minimum depth of 210 mm ensures secure mounting without mechanical interference.
Functions and Equipment in Detail
The module is designed as an empty component, i.e., it contains no pre-mounted components. It is equipped with a closed cover that enables a clean front design and protects against dust and mechanical impacts. The cover is permanently integrated and serves as the front closure of the module. The module is designed for use in modular kits available in shallow or deep configurations, allowing flexible adaptation to different enclosure configurations.
Technology Explained Simply
The module is equipped with NT-profile and ST-profile, enabling the mounting of assemblies and devices within the module. These profiles are standard in electrical installations and are used for securing switches, fuses, sockets, and other components. The designation PLE 48 refers to the module size within the system, enabling standardization of building units. The module size PLE 48 corresponds to a specific space requirement considered in the planning of distributors. The VPE (packaging unit) is 1, meaning the module is delivered individually.
Compatibility and Accessories
The module is part of the ABN ESPRO modular system and is compatible with other modules and building units from this system. It can be used in combination with shallow or deep modules to create a modular and adaptable enclosure configuration. The use of NT- and ST-profiles ensures compatibility with a wide range of standard assemblies. It is designed for use in meter enclosures and distributors featuring a modular structure.
Mounting and Installation
Mounting is carried out in a suitable enclosure or distributor with a minimum depth of 210 mm. The module is inserted into the designated position and connected to the assemblies via the integrated profiles. The closed cover is pre-mounted on the module and ensures proper front design. Installation requires no additional tools, provided the assemblies are mounted according to standards. The module size PLE 48 enables planned and standardized placement within the enclosure.
Advantages in Operation
The module provides a clear and structured division within the distributor, facilitating maintenance and inspection. The closed cover protects against dust and mechanical impacts. The use of NT- and ST-profiles enables flexible and standardized mounting of assemblies. The module size PLE 48 is widely used in distributor planning and ensures compatible integration into existing systems. The dimensions of 500 mm width and 300 mm height provide sufficient space for a variety of devices and assemblies.