ABN ABNRS208, EAN: 4015153820487

ABN ABNRS208 wall enclosure IP44 550x1250x210 mm

Industrial Material > Enclosures / Chassis > Enclosures

ABN ABNRS208 wall enclosure IP44 550x1250x210 mm

Lieske Part No. 842455
Mfg Part No ABNRS208
EAN-Code 4015153820487
Manufacturer ABN
Here only 1.002,44 EUR
1.192,90 EUR incl. VAT

Further information for ABN ABNRS208 wall enclosure IP44 550x1250x210 mm

General
Degree of protectionIP44
Protection classII
Materialsteel sheet, powder-coated
Pitch units192
Mounting typesAP-, UP- and recessed mounting
Cable membraneFlush-mounted
Pre-stampinglaterally for cross-wiring in AAR and busbar connection in NAR
Doorfull door
The ABNRS208 is a system enclosure of the brand ABN, designed for use in industrial and commercial electrical installations. It serves as an enclosure for mounting switching and distribution components in the AAR (connection and drive room) as well as in the NAR (network and connection room). The enclosure is suitable for AP- (connection plate), UP- (under-plaster) and partially recessed mounting and provides a structured, factory-prepared base for the installation of electrical components. It features a flush cable membrane that enables orderly and secure cable routing, as well as side pre-punchings that facilitate cross-wiring in the AAR and connections to busbars in the NAR. The full door ensures a closed and secure access to the interior of the enclosure.

System enclosure
The ABNRS208 is a complete empty enclosure serving as a base for mounting switching and distribution components. It is specifically designed for use in enclosures where structured and secure cabling is required. The integrated cable membrane ensures that cables can be routed flush and without additional fastening elements, reducing installation time and increasing clarity. The side pre-punchings allow direct connection to busbars and cross-wiring, simplifying the installation of fuses, switches, and other components.

Application areas
The enclosure is suitable for use in industrial plants, building automation, electrical installations, and other areas where protected and structured mounting of electrical components is required. It is particularly suitable for applications where a protection rating of IP44 is sufficient, i.e., protection against dust and splashing water. The protection class II (double insulated) means that the enclosure does not require a protective earth connection, as it is protected against electric shock by double or reinforced insulation.

Functions and equipment in detail
The enclosure is made of steel sheet, powder-coated to resist corrosion and mechanical stress. The surface is thus resistant to environmental influences and offers a long service life. The dimensions are 550 mm width, 1250 mm height, and 210 mm depth, providing sufficient capacity for mounting multiple components. The full door ensures a closed access and prevents unauthorized access to the electrical components inside.

Technology explained simply
The protection rating IP44 means that the enclosure is protected against dust (dust protection class 4) and against splashing water from any direction (water protection class 4). This makes it suitable for use in indoor environments as well as in areas where occasional splashing water may occur, such as in production halls or near washing and cleaning facilities. The protection class II (double insulated) means that the enclosure does not require a protective earth connection (PE), as it is protected against electric shock by double or reinforced insulation. This simplifies installation, as no additional grounding is required.

Compatibility and accessories
The ABNRS208 is designed for mounting components in the AAR and NAR. The side pre-punchings enable direct connection to busbars, simplifying the installation of fuses, power switches, and other distribution components. The flush cable membrane is designed for cable routing, ensuring orderly and secure cabling. The enclosure is intended for mounting in enclosures that provide appropriate mounting options.

Mounting and installation
The enclosure can be installed in AP- (connection plate), UP- (under-plaster), and partially recessed mounting. Installation is done on a wall or in an enclosure, with mounting options varying depending on the mounting type. The pre-punchings and cable membrane facilitate installation, as no additional drilling or modifications are required. The full door is typically fitted with a lock or latch to secure access.

Advantages in operation
The ABNRS208 provides a structured and secure mounting environment for electrical components. The integrated pre-punchings and cable membrane reduce installation time and increase the clarity of cabling. The protection rating IP44 and protection class II ensure safe and reliable operation without requiring additional protective measures. The powder-coated steel sheet ensures high mechanical strength and resistance to corrosion, extending the service life of the enclosure. The 192 division units provide sufficient space for mounting multiple components, making the enclosure flexible in use.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/842455
qrcode für ABN ABNRS208 wall enclosure IP44 550x1250x210 mm