General
Number of semiconductor outputs with signalling function	1
Number of contact energized outputs with signalling function	0
Type of actuation	Transponder
Type of interface for safety communication	Other
Type of electric connection	Connector M12
Type of switching output	Other
Width sensor	30
Height of sensor	75.2
Length of sensor	12
Explosion safety category for gas	None
Explosion safety category for dust	None
Construction type housing	Cuboid
Material housing	Plastic
Coating housing	Uncoated
Protected switch distance OFF	25
Protected switch distance ON	10
SIL according to IEC 61508	3
Performance level acc. EN ISO 13849-1	Level e
Max. output current at protected output	0.05
Ambient temperature	70
Mechanical mounting condition for sensor	Not flat
Rated supply voltage at DC	24
Voltage type	DC
Switching distance	15
Degree of protection (IP)	IP67
Cross-/short circuit identification possible
With monitoring function downstream switching devices
Suitable for safety functions
With status indication

Eden DYN (also with StatusBus), OSSD and AS-i are contactless safety sensors with coding, consisting of Adam and Eva. Eden is used on locked protective devices such as doors, gates and hoods and for safe position detection. They are ideal for harsh environments, have IP69K and a temperature range of -40 to +70 °C. There are versions with built-in, monitored reset with reset indicator. Eden DYN is suitable for single-channel DYNlink safety circuits with Vital or Pluto. Eden OSSD for two-channel safety circuits with safety relay or safety PLC. Eden AS-i are operated directly on the AS-i bus. Eden corresponds to type 4, optionally with high or low coding level according to EN ISO 14119 and reaches up to PLe (EN ISO 13849-1) or SIL3 (EN 61508, EN 62061), even with series connection/cascading of up to 30 sensors. Variable mounting and 360° scanning are possible.