General
Rated permanent current Iu	32
Rated short-time withstand current lcw	1.5
Number of poles	3
Colour control element	Black
Depth	82.5
Height	142
Material housing	Other
Width	81
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Suitable for intermediate mounting
Interlockable
Floor mounting

The short-circuit current limiter of the S800 series increases the short-circuit breaking capacity of the downstream switching devices. A distinction must be made between the SCL and the SCL-SR devices. The latter are self-resetting devices. The advantage of these self-resetting S800-SCL-SR short-circuit current limiters is that a continuous flow of current to all downstream switching devices is guaranteed, which simplifies group protection. Up to now, with the S800SCL devices, a separate short-circuit current limiter was used for each outgoing branch in order to be able to guarantee that all the others continue to work except for the faulty branch in the event of a fault. This is no longer necessary - you can now
protect an entire group of motor protection switches / high-performance circuit breakers with just one S800-SCL-SR. Can only be used for approved combinations.