General
Number of switches	1
Max. rated operation voltage Ue AC	800
Rated operating voltage	415
Rated permanent current at AC-23, 400 V	63
Rated permanent current at AC-21, 400 V	63
Rated short-time withstand current lcw	2.5
Rated operation power at AC-23, 400 V	30
Switching power at 400 V	30
Number of poles	4
Number of auxiliary contacts as normally closed contact	0
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as change-over contact	0
Device construction	Built-in device plug-in technique
Colour control element	Black
Type of control element	Other
Type of electrical connection of main circuit	Screw connection
Degree of protection (IP), front side	IP20
Degree of protection (NEMA)	1
Colour housing	Grey
Depth	131
Height	103
Material housing	Plastic
Width	286
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Suitable for intermediate mounting
Interlockable

Automatic load changeover switches meet the device standards DIN EN 60947-1, DIN EN 60947-3 and DIN EN 60947-6-1. The switches have an open switch (I-0-II) and are suitable for use as an automatic mains changeover switch. An OMD control unit is included. The control voltage of the motor is between 220 V and 240 V AC. The motor drive is controlled via a button or a central control center. The supplied handle for the emergency operation can optionally be locked in the OFF position. Remote control is prevented by mounting the handle or by mounting a lock. The switches can also be used in the AC and DC range. The automatic load changeover switches can be mounted vertically, horizontally and flat. The switches are available in compact versions from 40 A to 125 A. As accessories, ABB offers black handles for emergency operation, auxiliary contacts, fourth poles, N and PE terminals, terminal covers, connection terminals and much more.