General
Number of switches	1
Max. rated operation voltage Ue AC	1000
Rated operating voltage	1000
Rated permanent current at AC-23, 400 V	630
Rated permanent current at AC-21, 400 V	630
Rated short-time withstand current lcw	20
Rated operation power at AC-23, 400 V	355
Switching power at 400 V	355
Number of poles	4
Number of auxiliary contacts as normally closed contact	0
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as change-over contact	0
Device construction	Built-in device plug-in technique
Colour control element	Black
Type of control element	Long turning handle
Type of electrical connection of main circuit	Screw connection
Degree of protection (IP), front side	IP20
Degree of protection (NEMA)	1
Colour housing	Grey
Depth	299
Height	250
Material housing	Plastic
Width	476
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Suitable for intermediate mounting
Interlockable

Motor-operated load changeover switches meet the device standards DIN EN 60947-3 and DIN EN 60947-6-1. The switches have an open switch (I-0-II) and are suitable for use as motor-operated mains changeover switches. The switches can also be used in the AC and DC range. The switches can be mounted horizontally, vertically and flat. Depending on the type, the control voltage of the motor is 240 V DC, 110 V-240 V AC / DC, 24 V DC, 48 V DC, 110 V-125 V AC / DC and 220 V-240 V AC. The motor drive is controlled via a button or a central control center. The supplied handle for the EMERGENCY operation can optionally be locked in the OFF position. Remote control is prevented by mounting the handle or by mounting a lock. As accessories, ABB offers black handles for emergency operation, auxiliary contacts, fourth poles, N and PE terminals, terminal covers, connection terminals and much more.