Transfer mode: Asynchronous, half or full duplex, point-to-point • Interface: RS-232 9pin connector 9 pin connector • Signal spectrum: Transmit Data, Receive Data • Data rate: 0 to 115.2K bps • Power supply: Via RS232 port data, and hand-Share pin • Isolation: 2500V RMS isolation for 1 minute
2 channel RS232 optical isolator galvanic signal isolation transmitter and receiver combined in one unit easy communication between DCE and DTE devices to 115.2K bps data rate , the RS232 optical isolator STD 2.5KV B 9Pin combines receiver and transmitter in a. The insulator has a DB9S female connector on the DTE side and a DB9P male connector on the DCE side. The typical DTE devices include PCs, terminals, and printers. Typical devices are, for example, modems DCE and multiplexers. With the RS232 isolator STD 2.5KV B 9Pin these devices can communicate with the compliance requirements of the Low Voltage communicate with each other.

Specifications:

Transfer mode: Asynchronous, half or full duplex, point-to-point
interface: RS-232 9pin connector 9 pin connector
signal spectrum: transmit / receive
data rate: 0 to 115.2K bps
Power supply: Via RS232 port data, and hand-Share Pin
Isolation: 2500 V RMS isolation for 1 minutes
Dimensions (L x W x H): 61 x 33 x 17 mm
Standards: RoHS, CE, EN 55022, EN 61000-6-1, EN 61000 (-4-2, -4-3, -4-4 , -4-5, -4-6, -4-8, -4-11)