Diverse 2006137

Diverse 2006137 USB Isolator STD 1.0 LWL

Medical Technology > Electrical Insulation

Diverse 2006137 USB Isolator STD 1.0 LWL

Lieske Part No. 705485
Mfg Part No 2006137
EAN-Code
Manufacturer Diverse
Here only 219,19 EUR
260,83 EUR incl. VAT

Further information for Diverse 2006137 USB Isolator STD 1.0 LWL

General
Data throughput12 MBit/S
Cable length1,0 Metres
Current supply5 Volt
CertificatesCE, EN 61000-3-2, EN 61000-3-3, EN 55022
Connection configurationconnector A (computer) to female connector A (device)
Maximum transmission distance45 Metres
Total length1,24 Metres
Secondary power supply5-volt power supply, not included in delivery
Optionalmedical power supply
The USB Isolator STD 1.0 LWL is a device for galvanic isolation of USB connections, developed for use in environments where electrical isolation between a computer and connected devices is required. The device enables the secure transmission of USB signals via a fibre optic connection, ensuring complete galvanic isolation between the connected systems. The signals are converted from USB 1.1 format into light signals, transmitted over a fibre optic cable, and then converted back into USB signals. This principle protects against voltage spikes, grounding differences, and other electrical disturbances that could occur with a direct connection.

Applications

The USB Isolator STD 1.0 LWL is particularly suitable for medical applications, where electrical safety of patients and devices is of high importance. It can also be used in industrial environments where electrical interference or high voltages could compromise operational safety. The use of fibre optic as the transmission medium also allows for distances up to 45 metres to be bridged, enabling flexible arrangements of devices and computers without compromising isolation.

Functions and Equipment in Detail

The device operates with USB 1.1 standard (Full Speed) and supports a maximum data transfer rate of 12 MBit/s. It is compatible with USB 2.0 ports, although the transfer rate is limited to the USB 1.1 maximum. The connection is made via a cable with a length of 1.0 metres, with the total system length including connection components being 1.24 metres. The connection configuration is Type A plug (computer) to Type A socket (device), enabling a direct connection between a PC and an external device.

Technology Explained Simply

Galvanic isolation is achieved by converting electrical USB signals into optical signals, which are transmitted over a fibre optic cable. This optical transmission is not susceptible to electrical interference, as no electrical conductors are present in the transmission path. The primary unit, connected to the computer, is powered via the USB port. For medical applications, a medical power adapter is optionally available, meeting specific safety requirements.

Compatibility and Accessories

The USB Isolator STD 1.0 LWL is compatible with USB 1.1 and USB 2.0 ports. The secondary unit is powered via a 5-volt power supply designed for use in Europe. Certification is according to CE, EN 61000-3-2, EN 61000-3-3 and EN 55022, confirming compliance with European standards for electromagnetic compatibility and safety.

Installation and Mounting

Installation involves connecting the primary unit to the computer’s USB port and the secondary unit to the connected device. The connection between the two units is made via the included fibre optic cable. Mounting requires no special tools or additional components.

Operational Advantages

Galvanic isolation via fibre optic provides high protection against electrical interference and grounding issues. The maximum transmission distance of 45 metres allows for flexible device placement. Compatibility with USB 2.0 ports expands application possibilities without exceeding the maximum data rate. Certification to European standards ensures safety and compatibility during operation.

Certification

Certification is according to CE, EN 61000-3-2, EN 61000-3-3 and EN 55022. These standards relate to electromagnetic compatibility, power supply, and emissions of electrical devices. Certification confirms compliance with European safety and environmental standards.

Power Supply

The primary unit is powered via the computer’s USB port at 5 volts. For medical applications, a medical power adapter is optionally available.

Data Throughput

The maximum data throughput is 12 MBit/s, corresponding to the USB 1.1 Full Speed specification. Compatibility with USB 2.0 ports is provided, although the transfer rate is limited to 12 MBit/s.

Cable Length

The cable length is 1.0 metre, with the total system length including connection components being 1.24 metres. Transmission occurs via a fibre optic cable capable of bridging a maximum distance of 45 metres.

Connection Configuration

The connection configuration is Type A plug (computer) to Type A socket (device), enabling a direct connection between a PC and an external device. The connection is made via the included fibre optic cable.

Compatibility

The USB Isolator STD 1.0 LWL is compatible with USB 1.1 and USB 2.0 ports.

Safety

Galvanic isolation via fibre optic provides high protection against electrical interference and grounding issues. Certification to European standards ensures safety and compatibility during operation.

Function

The function of the USB Isolator is galvanic isolation of USB connections by converting electrical signals into optical signals, which are transmitted over a fibre optic cable. This protects against electrical interference and grounding issues.

Technology

The technology is based on converting USB signals into light signals, transmitted over a fibre optic cable. This optical transmission is not susceptible to electrical interference.

Standard

The standards CE, EN 61000-3-2, EN 61000-3-3 and EN 55022 relate to electromagnetic compatibility, power supply, and emissions of electrical devices. Certification confirms compliance with European safety and environmental standards.

Compatibility

Compatibility with USB 1.1 and USB 2.0 ports is provided.

Power Supply

The primary unit is powered via the computer’s USB port.

Data Throughput

The maximum data throughput is 12 MBit/s, corresponding to the USB 1.1 Full Speed specification.

Cable Length

The cable length is 1.0 metre, with the total system length being 1.24 metres. Transmission occurs via a fibre optic cable capable of bridging a maximum distance of 45 metres.

Connection Configuration

The connection configuration is Type A plug (computer) to Type A socket (device), enabling a direct connection between a PC and an external device.

Safety

Galvanic isolation via fibre optic provides high protection against electrical interference and grounding issues. Certification to European standards ensures safety and compatibility during operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/705485
qrcode für Diverse 2006137 USB Isolator STD 1.0 LWL