Diverse 13010108, EAN: 4043921039311

Diverse 13010108 ISDN Socket 2x8(8)

Telecommunication > Junction boxes > ISDN

Diverse 13010108 ISDN Socket 2x8(8)

Lieske Part No. 305539
Mfg Part No 13010108
EAN-Code 4043921039311
Manufacturer Diverse
Here only 8,28 EUR
9,85 EUR incl. VAT

Further information for Diverse 13010108 ISDN Socket 2x8(8)

General
ColourPearl white
Angle of plug45°
Number of sockets2
Socket type8-pole
Socket arrangementConnected in parallel
Connector type8-pin, 6-pin Western plug
ReducersSpring-loaded integrated
Contact typeScrew contacts
Shielding support pointFor shielded wire
Mounting methodAP mounting
Transmission bandwidth16 MHz
CompatibilityCat.3
This connection socket is designed for use in the field of telecommunications and serves as a connection element for ISDN connections. It is manufactured by Diverse and features a compact design with a width of 65 mm, a height of 80 mm, and a depth of 26 mm. The socket is finished in pearl white and weighs 38 g. It is designed for surface mounting on AP surfaces (surface mounting) and is suitable for use in indoor environments, particularly in residential and office buildings, where a secure and reliable connection for telephone and data transmission is required.

Connection socket for ISDN applications with integrated spring-loaded reducers enables the use of both 8-pin and 6-pin Western plugs. The plug orientation is inclined at 45°, which ensures ergonomic operation and improved accessibility of the sockets. The socket features two parallel-connected 8-pin sockets, allowing multiple end devices to be connected at a single connection point. The connection is made via 8 screw contacts, ensuring a secure and stable electrical connection. Additionally, a shield support point is integrated, used to secure a drain wire to ensure line shielding.

The socket is designed for transmission rates up to 16 MHz, meeting the requirements for Cat.3 sockets. This bandwidth is sufficient to reliably transmit the data rates required for ISDN connections. The use of Cat.3-compatible connection sockets is standard in telecommunications to ensure signal quality and interference resistance. The integrated spring-loaded reducers ensure that 6-pin plugs can be securely inserted into the 8-pin socket without requiring an additional adapter.

Installation is performed via surface mounting (AP mounting), meaning the socket is directly attached to a wall or flat surface without requiring an additional mounting enclosure. This makes the socket suitable for use in existing or newly constructed installations where quick and easy installation is required. The use of screw contacts enables a mechanically stable connection that can withstand frequent plugging and unplugging of connectors.

The socket is intended for indoor use and does not offer specific protection against environmental influences such as moisture or dust. It is not designed for use in explosive environments or areas with increased mechanical stress.

The socket is supplied as a single unit. Installation is performed by mounting the socket onto a suitable surface using the provided mounting holes. Cable connections are made via screw contacts, ensuring correct wire assignment according to applicable standards (e.g. TIA/EIA-568).

The socket is suitable for use in existing ISDN installations as well as in new systems requiring a Cat.3-compatible connection. The parallel connection of the sockets allows multiple end devices to be connected at a single point, with signal quality ensured by the specified bandwidth of 16 MHz. The integrated reducers increase flexibility when using different plug types, eliminating the need for additional adapters.

ISDN connection socket with 8-pin sockets, spring-loaded reducers, and AP mounting offers a reliable and compact solution for connecting telephone and data end devices. The socket is designed for indoor use and meets the requirements for Cat.3 sockets. Installation is simple and quick on a suitable surface, with cable connections made via screw contacts. The socket is not designed for use in damp or outdoor environments, as no specific protection rating is specified.

The socket is designed for use with 8-pin and 6-pin Western plugs. The integrated spring-loaded reducers allow both plug types to be used without additional adapters. The 45° plug orientation improves usability and reduces strain on the plug connection. The parallel connection of the two 8-pin sockets enables multiple end devices to be connected at a single point. The screw contacts ensure a stable electrical connection, even with frequent plugging and unplugging. The shield support point is used to secure a drain wire to ensure line shielding. The socket is suitable for transmission rates up to 16 MHz, meeting the requirements for Cat.3 sockets. Installation is performed via AP mounting, enabling direct attachment to a wall or flat surface. The socket is not designed for use in damp or outdoor environments, as no specific protection rating is specified.

The socket is supplied as a single unit. Installation is performed by mounting the socket onto a suitable surface using the provided mounting holes. Cable connections are made via screw contacts, ensuring correct wire assignment according to applicable standards (e.g. TIA/EIA-568).

The socket is suitable for use in existing ISDN installations as well as in new systems requiring a Cat.3-compatible connection. The parallel connection of the sockets allows multiple end devices to be connected at a single point, with signal quality ensured by the specified bandwidth of 16 MHz. The integrated reducers increase flexibility when using different plug types, eliminating the need for additional adapters.

Connection socket for ISDN applications with 8-pin sockets, spring-loaded reducers, and AP mounting offers a reliable and compact solution for connecting telephone and data end devices. The socket is designed for indoor use and meets the requirements for Cat.3 sockets. Installation is simple and quick on a suitable surface, with cable connections made via screw contacts. The socket is not designed for use in damp or outdoor environments, as no specific protection rating is specified.

The socket is designed for use with 8-pin and 6-pin Western plugs. The integrated spring-loaded reducers allow both plug types to be used without additional adapters. The 45° plug orientation improves usability and reduces strain on the plug connection. The parallel connection of the two 8-pin sockets enables multiple end devices to be connected at a single point. The screw contacts ensure a stable electrical connection, even with frequent plugging and unplugging. The shield support point is used to secure a drain wire to ensure line shielding. The socket is suitable for transmission rates up to 16 MHz, meeting the requirements for Cat.3 sockets. Installation is performed via AP mounting, enabling direct attachment to a wall or flat surface. The socket is not designed for use in damp or outdoor environments, as no specific protection rating is specified.

The socket is supplied as a single unit. Installation is performed by mounting the socket onto a suitable surface using the provided mounting holes. Cable connections are made via screw contacts, ensuring correct wire assignment according to applicable standards (e.g. TIA/EIA-568).

The socket is suitable for use in existing ISDN installations as well as in new systems requiring a Cat.3-compatible connection. The parallel connection of the sockets allows multiple end devices to be connected at a single point, with signal quality ensured by the specified bandwidth of 16 MHz. The integrated reducers increase flexibility when using different plug types, eliminating the need for additional adapters.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/305539
qrcode für Diverse 13010108 ISDN Socket 2x8(8)