| General |
| Category | Cat.3 |
| Socket type | RJ45 |
| Angle of plug | 45° |
| Connection type | Screw terminals |
| Max. number of cores per terminal | 3 |
| Wire diameter | 0.4 to 0.8 mm |
| Socket designation | UAE design 8/8(4) and UAE design 8/8(8) |
The in-wall mounting connection unit Cat.3 is an installation socket for connecting two end devices such as telephones or fax machines via RJ45 sockets. It is installed into the wall cladding and enables a neat and accessible connection indoors. The socket features two individual RJ45 sockets, designated as UAE design 8/8(4) and UAE design 8/8(8). These designations refer to the number of contacts and the connection configuration, with each socket designed for connection to a single terminal.
Applications
The connection unit is intended for use in indoor environments where structured cabling for telephone or data communication is required. It is particularly suitable for office and residential buildings where multiple end devices are to be connected via a common cabling system. The installation socket is recessed into the wall plate, so that after installation it lies flush with the wall and is visually unobtrusive.
Functions and equipment in detail
The socket provides two RJ45 sockets, each enabling a plug-in connection for an end device. The release levers of the connectors are oriented upwards, ensuring user-friendly insertion and release. The socket insertion angle is 45°, causing the connection cables from the devices to drop downwards and run without overhang. This reduces the risk of cable entanglement and facilitates handling. The screw terminals at the connection points allow connection of up to three conductors per terminal. The permissible wire diameter ranges from 0.4 mm to 0.8 mm, enabling connection with standard telephone or data cables.
Technology explained simply
The connection unit complies with Category Cat.3, which represents a minimum requirement for transmission quality for voice and data communication. Cat.3 is suitable for transmission rates up to 16 Mbit/s and is commonly used in ISDN applications. The RJ45 sockets are standardized and allow connection with common network and telephone connectors. The screw terminals ensure a secure and durable contact between the conductors and the socket, with a maximum of three conductors per terminal increasing flexibility in cabling. The 45° insertion angle is a design feature that optimizes cable routing and ensures neat cable installation.
Compatibility and accessories
The socket is suitable for use with ISDN and analog telephone systems. The RJ45 sockets are universally applicable and compatible with common end devices such as telephones, fax machines, or modems. The designations UAE design 8/8(4) and UAE design 8/8(8) refer to the specific socket configuration, with the numbers indicating the number of contacts and the connection type.
Installation and mounting
Installation is carried out in the in-wall area, with the socket being installed into a corresponding wall opening. Mounting requires preparation of the wall plate and routing of cables to the socket. The screw terminals allow for simple and secure connection of the conductors. The 45° insertion angle facilitates installation, as the cables drop downwards and do not extend beyond the socket. The socket is designed for indoor use and requires no special mounting aids.
Advantages in operation
The connection unit provides a neat and accessible connection for two end devices. The user-friendly orientation of the release levers and the 45° insertion angle improve usability. The screw terminals ensure a stable connection, and the support for up to three conductors per terminal offers flexibility in cabling. Cat.3 compliance ensures the required quality for ISDN and telephone applications.