Further information for Diverse 130040101-I ISDN Socket 4-pin undermount
General
Connections
2xRJ45 8P4C
Degree of protection
Flush mounted (plaster)
Colour
pearl white RAL 1013
Terminal resistors
2 x 100 Ohm
Bus connection
S0 or UP0
Terminal clamp
4-pole
Maximum number of cores
3
Conductor diameter
0.4 to 0.8 mm
Angle of plug
45°
Unlocking lever
Upward
Design compatibility
Central plates of leading switch manufacturers
Switchability
The underfloor socket 130040101-I is a connection unit for ISDN connections, designed for the plug-in connection of up to two ISDN terminals such as telephones or fax machines. The device is configured as IAE design 2x8(4) and enables integration into existing electrical installations. The socket features two RJ45 sockets with an 8-pin plug interface (8P4C), which are electrically connected in parallel via a circuit board to support a common S0 or UP0 bus. The integrated ISDN termination resistors, each 100 Ohm, are switchable, enabling flexible use with different connection configurations. The plug orientation of the sockets is inclined at 45°, causing the terminal connection cable to drop downward and avoiding any overhang. The release lever of the plug points upward, facilitating operation.
Applications
This underfloor socket is designed for use in residential and commercial rooms where decentralized, concealed installation of ISDN connections is required. It is particularly suitable for rooms with high requirements for optical integration into wall cladding, as it is compatible with design central plates from leading switch manufacturers. The pearl white color (RAL 1013) ensures discreet integration into standard and design installations.
Functions and Equipment in Detail
The socket provides two RJ45 connections, each designed for ISDN terminals. The two sockets are electrically connected in parallel via a circuit board, allowing both terminals to use the same bus. The integrated termination resistors of 100 Ohm per socket are switchable, which is important for configuring ISDN connections to avoid signal reflections. The screw terminal for the S0 or UP0 bus is 4-pole and allows connection of up to three conductors with a diameter of 0.4 to 0.8 mm. This ensures a secure and reliable connection to existing wiring.
Technology Explained Simply
The 8P4C sockets comply with the standard for ISDN connections and enable the transmission of voice and data over a digital network. The parallel connection of the sockets via a circuit board ensures that both terminals use the same bus without requiring additional connections. The switchable termination resistors are an essential component of ISDN technology, as they stabilize signal quality on the line. The 45° plug orientation reduces mechanical stress on the cables and prevents unintended bending of the connection cables.
Compatibility and Accessories
The socket is designed for use with design central plates from leading switch manufacturers, enabling a uniform visual appearance of the wall installation. The connection terminal is designed for connection to existing ISDN lines running over the S0 or UP0 bus.
Installation and Mounting
The underfloor socket is installed into a corresponding wall opening, with the screw terminal for the bus connection being connected to the wiring before mounting. The sockets are designed for direct plug-in connection of ISDN terminals, with the 45° plug orientation ensuring neat cable routing. Installation takes place in the underfloor area, so the socket is not visible after mounting the central plate.
Operational Advantages
The socket provides a reliable and low-maintenance solution for ISDN connections. The parallel connection of the sockets reduces the number of required cable connections. The switchable termination resistors enable flexible use, and the 45° plug orientation ensures proper routing of the connection cables. Compatibility with design central plates results in a uniform visual appearance of the installation.