| General |
| Connection types | 2xRJ45 8P4C |
| Construction type | Surface-mounted box |
| Terminal resistor | Switch-off function |
This surface-mounted socket is intended for installation in electrical and telecommunications systems and serves as a connection point for ISDN end devices. The unit features two RJ45 connectors of type 8P4C, suitable for connecting ISDN telephone systems, modems, or other ISDN-compatible end devices. The socket is designed as a surface-mounted version, meaning it is mounted directly onto the wall without being recessed into it. An integrated, switchable termination resistor ensures correct signal transmission in the ISDN network and can be deactivated if required, to adapt the connection to specific devices or line characteristics.
Surface-mounted socket refers to the design that is mounted directly onto the wall without requiring a wall opening or recessed installation. This design is particularly suitable for renovations, temporary installations, or when quick and flexible cabling is desired.
ISDN end devices are the devices connected to the ISDN network, such as ISDN telephones, answering machines, fax machines, or routers supporting ISDN connections. The socket enables direct connection of these devices to the ISDN line, with the two RJ45 connectors allowing parallel use or connection of multiple end devices.
RJ45 8P4C is the connector standard used here. Although RJ45 is typically associated with Ethernet connections, it is also used in ISDN applications, particularly for connection sockets. The designation 8P4C means the connector has eight contacts (pins), of which four are actually used (contacts). This configuration is typical for ISDN connections, as only four conductors are required for signal transmission.
Termination resistor is an electronic component installed at the end of an ISDN line to prevent reflections and signal distortion. In this socket, the termination resistor is switchable, meaning it can be activated or deactivated as needed. This is particularly important when multiple end devices are connected to the same line or when the line runs over a long distance, requiring a different termination.
The socket is designed for use in telecommunications infrastructure and serves as a connection element between the ISDN line and end devices. Cabling is performed via the RJ45 connectors, with connection cables required to comply with ISDN installation specifications.
Compatibility is limited to ISDN end devices that connect via RJ45 connectors. Use with other network technologies such as Ethernet or DSL is not intended, as the socket is specifically designed for ISDN connections. The socket is not an accessory for other products, but a standalone connection device.
In operation, the socket provides a stable and reliable connection for ISDN end devices. The switchable termination resistor function allows flexible adaptation to different network operating conditions. Installation is simple and does not require special tools, provided standard wall mounting is performed.